AULIGET Black Slate Peel and Stick Tiles: What to Expect Before You Stick ‘Em

If you want to update your kitchen or bathroom backsplash without the hassle of grout and tile saws, these AULIGET Black Slate peel-and-stick subway tiles offer a quick option. Each tile is about 3” by 6” and textured to mimic real slate. A hundred-pack covers roughly 12 square feet, but don’t skimp—grab 10 to 15% extra to cover cuts and inevitable mistakes.

The PVC material here holds up well against kitchen steam and splashbacks, plus it’s heat-resistant, so it’s fine behind your stove or sink. Cutting is pretty straightforward: with a sharp utility knife (or an exacto), score the back a couple times, snap it along the line, then stick. No tile saw, no grout mixing.

Now for the sticky truth about the adhesive: it’s super strong. Once a tile touches the wall, it’s not coming off cleanly. If you’re even slightly off on alignment, you’ll probably break the tile trying to reposition it, then have to scrape off leftover adhesive and possibly touch up your paint. So definitely measure twice and do a dry run by taping the layout in place before you peel backs off.

These aren’t renters’ best friends either. Without a protective layer between tile and drywall, pulling them off later will likely rip the wall surface too. Also, don’t expect corner or trim pieces from the box—if you need neat edges or corners, you’ll be cutting flat tiles to shape or mixing in other trim products (which rarely match perfectly).

Another heads-up: color consistency can be hit or miss. Ordering multiple batches at different times risks getting tiles in slightly different shades, from charcoal black to lighter graphite, which stands out unless you’re going for a patchwork look. Best to buy all you need in one shot if you want the tones to match.

When it’s go-time for installation, clean your wall well with isopropyl alcohol on a lint-free cloth to ditch grease and dust. After cleaning, lay out a dry pattern using painter’s tape to plan exactly where each tile goes. Once satisfied, peel off the backing and press firmly using a small rubber roller or the heel of your hand to avoid bubbles. If your backsplash gets splashed a lot, run a 1/8” bead of silicone caulk along the bottom where the tiles meet the counter to keep moisture from sneaking underneath.

Style-wise, that deep black slate finish looks sharp against lighter cabinets for good contrast and suits modern or industrial vibes. If you want to soften things up, bamboo or rattan shelving and some warm-toned accessories do the trick. A strip of under-cabinet LED lighting really makes the tile’s texture pop after dark.

To wrap it up: these AULIGET peel-and-stick tiles offer a budget-friendly backsplash that mimics real stone with minimal mess. But the adhesive’s grip means you’ve got one shot at a perfect install. If you’re renting, planning to swap tiles often, or want wiggle room for repositioning as you go, look somewhere else. For homeowners who prep walls properly and measure carefully, they deliver a durable, striking upgrade. Just don’t expect removal to be easy or pretty.