iOttie Easy One Touch 6: What You Need to Know Before Buying

A straightforward look at a popular one-handed car phone mount that’s not without its quirks

One-Handed Operation: Simple but Can Get Stiff

The Easy One Touch 6 is designed for quick and easy use—you press the side arms, push your phone against the trigger button, and the mount clamps the phone automatically. Convenient for one-handed use while driving, no doubt.

However, the trigger button tends to become stiff over time. It starts out smooth but after weeks of everyday use, it often requires more force, sometimes forcing you to use both hands. If you don’t like fiddling with lubing or fixed parts that wear, this might be annoying.

Build and Adjustability: Looks Good but Loosens

The mount has a clean, matte-black design that fits well on most dashboards or windshields without standing out. Its telescopic arm extends from 5 to 6.75 inches (per manufacturer specs) and swivels up to 260 degrees, plus 360-degree rotation at the ball joint, allowing various viewing angles.

That said, the joints tend to loosen faster than expected. After some months and several tightening adjustments, the arm can wobble over bumps or potholes, causing your phone to shift during your ride. If you don’t mind periodically tightening a small bolt yourself, it works, but expect some maintenance.

Suction Cup and Adhesive: Fails in Heat

This mount uses a suction cup with a sticky surface and a plastic dashboard pad to stick securely. It does well enough in moderate temperatures and stable conditions.

But in hot climates or during summer, owners report the suction cup and adhesive pad losing grip, especially inside hot cars. The suction can detach from the surface, causing the whole mount to fall off. The dashboard pad is a one-time use and sometimes difficult to remove, and replacements are generic 3M pads, not official iOttie parts. If you live somewhere your car cabin heats up dramatically, this mount won’t hold reliably without extra effort like sunshades or constant reattachment.

Device and Case Compatibility: Works Best with Slim Cases

The cradle claims to hold most phones and cases, but it’s most reliable with slim or moderate thickness cases. Bulkier or heavily ruggedized cases can prevent the arms from closing properly or the bottom foot from securing the phone firmly, which may lead to slipping or unstable fit.

If you use thin cases or bare phones, the grip should be solid. For heavy-duty cases, you’ll need to test fit carefully.

Cable Management: Limited but Handy

There’s a built-in cable organizer to keep your charging cable neat and prevent it from dangling during drives. It fits standard cables well.

However, thicker or braided cables often don’t fit through the organizer or get stuck halfway, leaving you with loose, hanging loops. It’s functional for everyday cables, but don’t expect it to accommodate large or premium cord sizes.

Mounting Options: Dashboard or Windshield

You get two mounting choices. Use the reusable plastic dashboard pad to stick the mount on a flat dashboard surface (not suitable for leather dashboards), or mount directly on the windshield using the suction cup without the pad.

Be aware the dashboard pad is designed for one-time use only, so if you remove it, you’ll need to find an aftermarket replacement or switch to windshield mounting. Windshield mounting prevents damage to leather but can increase glare and reflections, requiring you to adjust the phone orientation carefully.

Heat Sensitivity Means Restricted Use

The mount performs well in cooler or cloudy environments and holds tight even on bumpy roads or rough terrain.

But it’s unreliable where inside-car temperatures soar, such as in direct sunlight on hot days. The suction cup and adhesive pad degrade under heat and UV exposure, leading to detachment and possible damage to your phone if it falls.

You can try rinsing the suction cup to restore stickiness temporarily, but this isn’t a permanent fix. If your climate routinely cooks your car interior, consider a different mounting solution.

Who is This Mount For?

This mount suits drivers in moderate climates who value quick one-handed phone access and have phones with slim cases. It’s sleek and helps keep charging cables managed if you use standard cords.

If you live in hotter areas, use bulky phone cases, or hate dealing with occasional remounting hassles, look elsewhere. There are sturdier alternate mounts, including magnetic holders with metal plates or vent and CD-slot mounts that tolerate heat and rough use better.

Bottom Line

The iOttie Easy One Touch 6 delivers on its promise of one-handed convenience and a clean look but struggles with heat-related adhesion problems and wear on moving joints. It shines best where temperatures stay moderate, and phones are carried in thin cases. Otherwise, its upkeep demands and heat sensitivity make it more trouble than it’s worth.